Monday, December 12, 2011

Refractometer Abbe

In physics, we certainly know who called with the fluid. Fluids affect the movements of particles and scale objects around the fluid. Suppose a fluid liquid, say fluid example is a cup of water that we do not yet know the content in detail both chemically and in the general. In the physical sciences we are able to analyze the water content by using several methods just call it like X-Ray Diffraction or with a refractometer.

Refractometer is itself a tool used to determine and analyze the content or concentration of the dissolved material. This means that we are not only able to find the solution in terms of content but we are also able to calculate how much the concentration of dissolved material in a liquid. The principle of the work done by refraktomere is based on the principle of the properties of light, ie, reflection, refraction, and even diffraction.

For additional information, tools refractometer which is known by many people, known as Abbe refractometer, which is an instrument invented by Dr.. Ernst Abbe, a physicist who originated from Germany and was discovered in the early 20th century BC. Abbe took the principle of interference of a light which strike two transparent materials.
In order to more easily, here is the following explanation of the refractometer According to
Ernst Abbe (1840–1905), working for the Zeiss Company in Jena, Germany in the late 19th century, was the first to develop a laboratory refractometer. These first instruments had built-in thermometers and required circulating water to control instrument and fluid temperatures. They also had adjustments for eliminating the effects of dispersion and analog scales from which the readings were taken.
In the Abbe' refractometer the liquid sample is sandwiched into a thin layer between an illuminating prism and a refracting prism. The refracting prism is made of a glass with a high refractive index (e.g., 1.75) and the refractometer is designed to be used with samples having a refractive index smaller than that of the refracting prism. A light source is projected through the illuminating prism, the bottom surface of which is ground (i.e., roughened like a ground-glass joint), so each point on this surface can be thought of as generating light rays traveling in all directions. A detector placed on the back side of the refracting prism would show a light and a dark region.

Over a century after Abbe's work, the usefulness and precision of refractometers has improved, although their principle of operation has changed very little. They are also possibly the easiest device to use for measuring the refractive index of solid samples, such as glass, plastic, and polymer films. Some modern Abbe refractometers use a digital display for measurement, eliminating the need for discerning between small graduations. However, the user still has to adjust the view to get a final reading.

The first truly digital laboratory refractometers began appearing in the late 1970s and early 1980s, and no longer depended on the user's eye to determine the reading. They still required the use of circulating water baths to control instrument and fluid temperature. They did, however, have the ability to electronically compensate for the temperature differences of many fluids where there is a known concentration-to-refractive-index conversion. Most digital laboratory refractometers, while much more accurate and versatile than their analog Abbe counterparts, are incapable of readings on solid samples.

In the late 1990s, Abbe refractometers became available with the capability of measurements at wavelengths other than the standard 589 nanometers. These instruments use special filters to reach the desired wavelength, and can extend measurements well into the near infrared (though a special viewer is required to see the infrared rays). Multi-wavelength Abbe refractometers can be used to easily determine a sample's Abbe numbers.

Sunday, December 4, 2011

The uniqueness and beauty of the Sea Worm

Previously I apologize because it was so long ago does not make the article into this blog. That is because the persistence of the busy-busy I had to do on campus (students are still advised). Okay, do not linger.

Well, this time we will discuss is called a worm. Eitss, patient first, because this time we are not talking about worms in your mind. Maybe, when you see the title of my article this time, you will immediately think with worms that its disgusting have colors that make your eyes closed because of disgust and even seemed ludicrous. However, worms are we going this time peel (Peel continues as the worm hulled) no earthworms and friends. Rather we will discuss worms residing in the ocean. Which according to people is one of the animals in the aquarium decoration. And in fact, be a high protein source for among certain people.

Okay, Let's kick ass one by one.

Worms, worms What exactly is it? The worm is no vertebrate animal that has a long flat shape and there is even a hairy and some are not hairy. The worms are even some that are beracung some are not toxic. In general, the worms can be found in areas that have water situation is not too much or in damp places. It is in because of the worms mostly by using body surface. Therefore, we often find worms in the soil a dirty, damp and even rot.

Because we are considering the class of worms rather than dirty, then we will immediately jump worm that frequent bathing class alias net. One is a marine worm. In other types of marine worms, animals in the biological sciences we often hear the term marine worm called with a class of Polychaeta. Basically the meaning of Polychaeta have had lots of hair (remember not the fur, because fur is much different from the same hair) According to Wikipedia,
Polychaeta are a class of annelid worms which generally live in the sea. The entire body surface polychaeta contain stiff hairs or setae which coated cuticle so slippery and stiff. His body was attractive color, such as reddish purple. Each segment is equipped with a pair polychaeta body motion of the tool or tools swim called parapodia. This tool also acts as a respirator. Most of the measuring 5-10 cm, but there are less than 1 mm and some are up to 3 m.

Tuesday, August 30, 2011

Happy Idul Fitri, 1 Syawal 1432 H

Thursday, 30th August 2011 I as a moslem gain a great great victory after pretend my thirsty and my hunger for a month. (ah susah kali pun pake bahasa Inggris, sekali-kali pake Bahasa aja lah, izin yo Om Google)

Haduh, hari ne ane di Sibolga merayakan yang namanya lebaran, berangkat tanggal 29 Agustus kemarin pas selesai subuh, dan berharap yang namanya idul fitri 1 syawal 1432 H itu jatuh pada keesokan harinya.....

Setelah mengalami perjalanan selama 10 jam (kurang lebih) dan telah menempuh jarak sejauh 300 Km mungkin ditambah dengan rintangan yang mampu membuat jantung anda berdetak kencang, ternyata harapan yang ditunggu-tunggu untuk menikmati lebaran di kota sibolga tidak seperti yang diinginkan. Dasar, 1 syawal 1432 H ditetapkan pada lusa harinya yang bertepatan pada 31 Agustus 1432 H.

Indonesia, selalu bermasalah dengan yang namanya penetapan 1 syawal... dan banyak yang membuat hal ini menjadi suatu perbedaan yang signifikan..
salah satu ane baca di situs favorit indonesia, yakni ada komen yang mengatakan bahwa perbedaan waktu masing-masing negara di dunia sampai yang paling jauh itu tidak lebih dari 24 jam, namun perbedaan lebaran malahan lebih dari 24 jam, hal itu tentu membuat kita gerah, karena memang perbedaan waktu yang nyata/ real itu tidak pernah lebih dari 24 jam sehingga apabila di belahan bumi yang lain sudah melihat hilal maka kita juga sudah masuk yang namanya bulan baru karena ingat bulan mengitari bumi.

Akhirnya ane liat situs di, dan ternyata pada tanggal 29 Agustus pukul 5 sore kemarin bulan sudah memasuki bulan baru???? waduh, bener juga ya dan ternyata di daerah cakung, Jakarta Timur telah terlihat hilal diatas 3,5 derajat???

Dilema bagi saya...
Secara determinasi science, hilal sudah nampak dan itu sudah hukum alam bahwa yang namanya perubahan fase bulan merupakan waktu yang periodik dan tersusun secara sistematis.... dan memang menurut informasi yang benar, ramadhan berusia 29,5 hari..

Mana yang benar????

namun, saya akui, saya berlebaran pada hari selasa 30 Agustus 2011... apabila ada yang berhari raya pada tanggal 31 Agustus 2011 itu pun tidak masalah bagi saya, sebagai umat islam tentu yang namanya perbedaan jangan di jadikan sebagai sebuah permusuhan, karena Kebenaran Mutlak dari Allah SWT....

Last but not least
Finally, Allahumma firlil muslimina wal muslimat fil ahya min hum wal Amwat
Allahuakbar Allahuakbar Wallillahihilhamd

Mohon Maaf Lahir dan Bathin, Minal Aidzin wal Faizin, Selamat Hari Raya Idul Fitri 1 Syawal 1432 Hijriyah

Wednesday, August 17, 2011

Ultra Short Focal Projector NEC, solution presentations in small rooms

The presentation was not confined to the office. Today, the world of education became more familiar with the activities of this one. The problem, to make a presentation, it takes a large room so that the projector can project images with an ideal distance. While the average classroom sizes are small. 

Similar problems were often encountered in a small office space. Finally, many companies are forced to use only a large room for meetings. The problem, when a large meeting room was full of small meeting rooms, had to be used even if can not use the projector. 

Spacious room is often a problem when using a projector. However, the problem is now resolved with the presence of the latest generation of Ultra Short Focal Projector NEC. By announcing the latest generation of Ultra-Short Projectors are available in four types U300X, U250X, U310W, and U260W this can indeed be a solution presentations in small rooms. 

Eliminating shadows and glare that normally found with standard projection systems, can be achieved by mounting the projector to the wall above the screen. This makes the Ultra Short Focal projector ideal for education environments using standard or interactive whiteboard. With a very short projection distance, the reflection method, and the distance is unbelievably close to the cabinet, making use of this model is very efficient room. 

In fact, this projector can be used up to the smallest distance of about 47.5 centimeters to produce the display by 63 inches. As a comparison, conventional projectors usually takes a distance of about 1.2 meters to produce a display of about 60 inches. All that can happen thanks to the Mirror Aspheric Technology, the technology that reflects the light through the glass. 

For information, the projector can be used on a table, sideboard, or mobile trolley has a 3D-readyU series created by Link and DLP DLP technology from Texas Instruments. It is as future-proof next-generation projectors. 

For corporate customers who do not have the space needed for a standard projector, this projector offers an attractive alternative. They offer XGA and WXGA resolution, respectively, and up to 3100 ANSI lumens brightness. Their connectivity including dual HDMI inputs and a computer, and variable audio out to connect the projector to external speakers and volume control via remote control the projector. 

The question is, with such a close distance, what about the quality of the resulting appearance? NEC Projectors NEC Display Solution manufactured by Japan which is one of the leading companies in the world's projector market. 

NEC Display images through the projector will be very bright because it has a brightness level of the calculation of light projected onto the screen quite large with a 2000:1 contrast ratio. 

Another plus, this projector has a much more concise models and futuristic than with previous generations. For use in the classroom, NEC projectors can help the learning process more exciting and enjoyable place. 

Pupils would prefer to learn through visualization, compared to only learn by listening to the teaching method. Therefore, the use of the projector probably has become an absolute necessity in every classroom. Moreover, if the projector is already 3D-Ready technology like that of NEC projectors of this type. 

Besides suitable for use in small offices and classrooms, these projectors are also suitable for displaying video or advertising of products that are fired into the glass counter.

Friday, August 12, 2011

Popular disease in Indonesia

Environmental change, demographic transition, social, economic and socio-cultural influence changing patterns of disease in some people's lives. 

Lifestyle changes either in the form of a shift to a Western diet high in fiber and low in fat, salt and excess sugar consumption, reduced physical activity, and cigarette consumption have an impact on increasing cases of non-communicable diseases. Indonesian health ministry data republic declared percentage rate is not an infectious disease mortality increased from 41.7 percent in 1995 to 59.5 percent in 2007 yesterday. 

On the other hand, Indonesia is still struggling to overcome infectious diseases such as dengue hemorrhagic fever, diarrhea, malaria, tuberculosis, acute respiratory tract infections, pneumonia, measles, typhoid, and hepatitis. 

The results of health research foundation in 2007 reported by the Ministry of Health Republic of Indonesia in 2008 showed a high prevalence of communicable diseases in Indonesia, such as hypertension, heart disease, stroke, diabetes mellitus, asthma, joint disease, cancer / malignant tumors. Here are the types of diseases that attack Indonesia. 

  • Upper respiratory tract infection acute
  • Fever
  • Skin disease
  • Diarrhea and gastroenteritis by a particular infection
  • Disorders of refraction and accommodation
  • Dyspepsia (abdominal pain complaints)
  • Essential hypertension
  • Dengue hemorrhagic fever
  • Pulpal and periapical disease
  • Ear disease and mastoid processus
  • Conjunctivitis and other disorders conjunctival
  • Typhoid fever and paratyphoid
  • Pneumonia
  • Appendix Diseases
  • Gastritis and Duodenitis

Sunday, August 7, 2011

Caring for electrical installations in the home

In cities with a population of densely often we hear the news fire accident that occurred in the settlements due to short-circuit or a language commonly known as shorting. Electricity is a primary need at this time, but if not careful can be a source of disaster for us and the people around us. 

Electrical installations are installed by the state electricity company concerned in the house had been designed as safely as possible. Thus, any attempt to modify the installation for personal gain such as stealing electricity, dangerous for the occupants of the house and will be subject to penalties for violating the rules. 

Cables attached to the pole Low Voltage Network (LVN), connection cable homes (CC), to the Border Tool and Estimator (BTE), comprised of principle Kilo Watt Hour Meter and MCB (Mini Circulate Breaker) is a state electricity company assets concerned. Meanwhile, a series of cables attached as a home or building electrical installations is an asset owned by the homeowner. 

Electricity is energy that must be conserved as well. Therefore, use electricity in a reasonable and safe. Several steps can be cultivated in order to stay safe in the electricity network usage. 

The first step, do not accumulate on a single outlet power source. Use an electric circuit breaker (fuse) in accordance with the power connected, do not overdo it or less. Nor should any electrical cord that chipped in and around the house. 

Next, keep the power source of the reach of children. Use electrical materials, such as cables, switches, sockets, plugs (contact pin) qualified and have a good standard label that nationally, products, or international. 

The trees that grow around our homes should not be allowed to grow and touch the electrical network. This can be harmful to living things and our property, especially if rain. Therefore, layout and trim trees around power lines. 

Then the installation of the antenna is too high to avoid approaching or touching power lines. As good citizens, use of electricity has become our right. Never hitch on electricity, Tampering with or stealing state property grid from elsewhere. 

Get used to being careful, vigilant and not careless in using electricity. Remind kids not to play kite under or near power lines.

Thursday, July 28, 2011

Goodbye to tired eyes

Dry and tired eye
The demands of office work or piling tasks often require paper we looked at a computer monitor all day. As a result, the eyes have computer vision syndrome or CVS is often abbreviated, is a state in which the eyes become tired and difficult to focus the object of our gaze.

CVS is another indication that the red eyes, sore, watery or dry, eyelids or forehead feels heavy, headaches (migraine), and pain in the shoulder. This is caused by the length of a radiation monitor that hit the eye. In addition to CVS, the eyes can also be affected by myopia or nearsightedness, high eye pressure or glaucoma medical and pull on the outer muscles of the eyeball.

To cope with tired eyes, there are a number of steps that you can do. First, keep your distance from the eye to view the monitor. The recommended distance monitor is about 50-100 cm from the eye. If necessary, you can enlarge the font text on the monitor.

Secondly, you need to pay attention to lighting. Should not work in a room that is too bright and dealing directly with the source of light. However, you also should not work with computers the room is too dark. Or our habit of working in the room with the lights turned off should not be done.

Third, switching to LCD (Liquid Chrystal Display). Tube or CRT monitors have the effect of radiation that is greater than LCD monitors. If you are still using a CRT, you should use filters to prevent eye disease tired.

Fourth, adjust the settings of your monitor. For example by adjusting the brightness in the face of the text or play games.

Fifth, you need to rest my eyes. If too long to see at close range, look away toward the distant. The trick you can do with a few minutes like winking eye as often as possible so that moisture is maintained.

Sixth, if necessary, do relaxation. You can lay down the shoulder on the back of the chair and closed for a few moments, breathe deeply. Or, put your elbows on the table with the palms facing up. Let the weight fall forward and his head fell into the hands. Then, pull a long breath. This will relieve your tension.

Tuesday, July 26, 2011

Fluent in learning to drive a car

When riding a motorcycle is quite easy to learn, not so in reality when you have to learn the four-wheel drive car aka. In fact, it takes special time to really learn it. Besides the need to be a special time also need time to understand each other between the driver and the car or if the term the term is called the orientation with the car.

The most uncomfortable is much less you have a private car, but not proficient in the drive. You are more often the people who depend on others to bring your car in your daily activities.

To that end, learning to drive, needs to be done, not only benefit themselves, but it can help your family or friends in need of services in certain situations.

When the day came to learn, first prepare your mind. Try to think calmly, not to worry and so confident. Do not forget, wear clothes and comfortable footwear to support the activity of learning to drive. Do not wear clothes that make you uncomfortable.

Next, make sure the vehicle is used in normal circumstances, such as the function of the brake, accelerator, clutch, and excellent mechanical condition. In addition, make sure also mirrors and car lights function normally.

We recommend that you use a large-sized cars and wear facility manual clutch. If you use a private car, you should use a car that was insured to avoid unwanted circumstances.

As I sat in the car, try to adapt about 15 minutes, getting to know and understand the clutch pedal, brake, gas, and Speed Gear. Wear a seat belt, adjust the seat position, and walk.

When driving, follow the instructions from the teacher. Relax, no need to panic and unnecessary speeding, try the normal speed. Then do not hand in a state of tense and rigid in holding the steering wheel. Follow all traffic signs are up and running on track.

For the initial stage, try to learn driving a car within an hour beforehand. Ask the instructor to take you into the path of the dense, dense enough, and quiet. In the quiet lane, a short time you learn how to park the car and pulled back.

After finishing the first day, ask for an evaluation of teachers. Do a more continuous learning process on another day. With the perseverance to learn and great intentions, surely you can be adept at driving a car.

Sunday, July 24, 2011

Advan notebook Soulmate M4-33 125 series, AMD-powered laptop cool

First, to play a nice game graphics, it takes a computer desktop with a powerful performance. But now, to capitalize a laptop you can play cool games, you name it such as Need for Speed, Call of Duty, Football Manager, or games like Red Alert and the latest version of Resident Evil.

It's not all laptops can be used to play games that are high graphics. In addition to having a good processor, the laptop must have a graphics card to support image display.

Just to cite an example, processors such as AMD (Advanced Microcontroller Devices) is familiar among fans of the game. One that they like about this processor is the ability to display visual images to play games, view and edit photos, and a sharp display with bright colors.

No wonder if some professionals, such as gamers, photo editing, and graphic designers prefer to use computers with AMD processors. How not, every product is embedded with AMD's ATI Radeon Graphic Card so the ability of AMD's graphics and multimedia products no doubt.

Looking at the ability of AMD processors are so stunning, certainly a lot of companies who want to work with these manufacturers. Luckily, there is one laptop manufacturer in Indonesia, Advan towed AMD notebook to work together to create a new product that is advan notebook Soulmate M4-33 125 series which was launched several months ago.

Notebooks that carry the AMD processor Atlhon 2 Danube N330, 2.3 GHz is equipped with ATI Radeon HD graphics 250, 256 Mb shared. It might be a pride for having been appointed Advan business partner of one of the best and biggest Microcontroller manufacturers in the world. For information, notebooks that use AMD processors comes in attractive colors ie, black and handsome, passionate red, silver charming that prices range from around 3 million rupiah.

Property business? Why not?

There are many ways to cultivate wealth through investment. One investment tool favored by many people in this day and age is an investment property. But the question is, how large and profitable investment in the property? Are the benefits greater than other forms of investment such as stocks?

History may provide a universal fact, property values ​​almost never goes down. Limitations and the narrowing of land to encourage the value of property assets continue to rise. Lands formerly worthless now because of the real estate business to make these lands have sky-high prices. Not surprising, the classical principle that is often used in estimating the value of property is the choice of location, location, and location.

Basically the property market is affected by the condition of the economy of a region / country, interest rates, and last is the inflation rate. The lower  level of interest rates and inflation, property investment more and ogled by the businessmen. Therefore, here are tips in the field of investment property:

Selection of a strategic location. That is a way of seeing the situation of the property to be invested seen from transport access. If it closer access to transport and activity centers such as offices, the trading value of investment property that you have the higher. And one more thing, if the property will be used as a source of income by way of lease, select the appropriate location to target consumers. In addition, the strategic location of course unaffected by the presence of a vulnerable area, be it a flood-prone, vulnerable to disease or prone to security. Because if the location where your property has the potential are prone to the value of your property will go down.

Warranty. Obviously this is a second factor for many people in choosing the property you want to use. Consumers will see if there is no guarantee the public infrastructure to support their daily activities. Infrastructure is infrastructure that must be owned by a property that is electricity, clean water, sanitary facilities, security and roads.

Legality of the product. Property that is used must comply with applicable law. in general this includes the completeness of business licensing and legal documents. So it can avoid future legal issues. Usually if a property has the characteristics of the above, then the property can be trusted and you can use as your investment. Hopefully get a better profit than before.

Saturday, July 23, 2011

Check the health of the skin from dehydration

Hot sun and heat shock temperatures typical of tropical regions in Indonesia is making rapid body fluid was drained. Moreover, if the activity is mostly done outdoors, the supply of body fluids should also be continued.
In addition to consuming enough water to drink 2-3 liters a day, you need to pay attention to skin conditions. Skin is the first gate when subjected to dehydration or lack of body fluids. when you get dehydrated, the skin will appear dry, dull, slack, and stained dark. 

Therefore, when on the move a lot of challenging sunlight. You need to provide extra protection. Not only to deny the sun's ultraviolet rays are harmful to health, protection for the skin form of moisturizer is also useful to maintain skin moisture and elasticity. There are three kinds of skin moisturizers include body mist, body lotion and body butter. 

Body similar to the body spray mist to scent the body. The aroma is quite strong because it has little content of aromatherapy. In the body mist contained in a certain amount of oil that serves to bind water in the skin so that dehydration can be prevented. Levels of a light moisturizer to make appropriate body mist applied to the skin in normal conditions. 

Another body lotion body lotion. Body lotion contains good fats that can help accelerate the regeneration of skin cells. Humidity is higher than the body lotion body mist. Not surprisingly, body lotion suitable for normal to dry skin. Body lotion is also properly applied to those who have skin that is not too problematic, and rarely exposed to extreme temperatures such as cooling or sun room. 

Among the moisturizer, body lotion, body butter has the highest humidity levels. The texture is very thick body butter because it has a high fat content. Body butter is best suited to cope with problematic skin. For example, extra dry skin, rough and chapped. Area elbows, knees, heels, and other skin folds. To prevent stretch marks during pregnancy, you can use body butter on a regular basis. 

All three are very good moisturizer we use at the time of the shower because when the skin can absorb optimally moisturized.

Friday, July 22, 2011

Advancement of Science, Technology and current trends, the Wide Touch Screen

In today's modern times, electronic products has become a lifestyle many people. Products with high technology to give a contemporary trend. Someone with high-tech products with humans suggests it lived in a high civilization. However, the name remains the trend will continue to spin, as if the name suggests the trend is always there and eternal in every human life. If present, technologies such as mobile phones, initially we know whose name is synonymous with the size of phone is great but the longer it tends to get smaller but has such great benefits. And even, in the present along with the need for visual enjoyment, phone size instead tend to become enlarged but did not reduce its main function to pamper the consumer.

Basically, not everyone is inclined to choose a large-sized cell phone to use. However, this trend is seen in people who have a hobby of photography and video to mobile phones with screen width is more desirable. Perhaps that is one plausible reason is expressed well as a trend / today's lifestyles.

Especially with social networking sites like Facebook and Twitter. Mobile phones have certainly evolved with the rapid promises a feature that is able to access sites like Facebook and Twitter. Many people have become one of the favorite medium for surfing in cyberspace. Opening the social networking sites like facebook and twitter is often done by some people through mobile phones. This is mainly done them a high mobilization of the hobby and interact with the virtual world.

Well, you probably include one of those people who always carry cell phones everywhere. Various new habit is formed because of this one thing. For example, if previously every waking in the morning, the first thing we did was go to look for breakfast then to the current ritual of looking for a breakfast that was passed by the ritual accessing social networking sites.

In order to find comfort in terms of accessing the internet, quite a lot of people are choosing phones with screen width. Besides the touch screen technology was increasingly becoming a prima donna. No wonder so many local and international mobile phone manufacturers are vying to issue cell phones widescreen with high technology. High technology is like touchscreen technology. But, did you know that touchscreen technology is divided into several kinds.

Resitive screen for example, this type of touch screen technology works by using fingers or any object that is pressed on the screen. However, one drawback of this type of screen is touch-sensitive screen risk. Usually we enter the phone with a touchscreen often we put in the bag so often depressed. Of course, the type with the risk that sensitive this makes the heart worried about your phone. However, do not worry because it can be overcome with a protective flip phone with a model for protecting the screen from pressures.

In addition there is also a type Capacitive screen. This technology works with the touch of a finger and should not be able to use other objects such as nails or a stylus. This is because the technology is working with the principle of electrical charge that is in the body.

Finally there is the type Multi touchscreen. As the name implies, this technology can be touched by more than one finger. Multi touchcreen is capable of being touched by the fingers of different people simultaneously. Thus providing a function to enlarge, shrink, change position or move the position of objects on the monitor.

Thursday, July 21, 2011

Take Care of Your Printer Health

A computer device as if not complete without a printer device. Now, a tool that we often encounter printer has experienced growth both in terms of sophistication, the model / view, ease and variety of features and some have been matched as copiers and scanners. Variety of these printers are so many kinds on the market. However, the quality as good as any printer would be useless if you can not take good care. As a result of it all often irreparable damage is not known by the owner, but the damage was only on the components easy to replace. However, because many people who care are neglected printer, the printer will be more easily damaged. To be durable printer and print quality is maintained, there are some things you should do.

First, use the printer regularly and do not leave ink in a long time because it will make printer ink liquid freezes or not as they are so difficult to use.

Second, turn the printer off when not in use because this step will prevent the closing of the holes flow of ink in the printer head.

Third, as a treatment, clean the impurities that exist in the printer at least once every 1-2 weeks depending on printer usage.

Fourth, when printing, use paper that is still smooth and not folded, because when folded will make the rollers on the printer becomes damaged.
Fifth, loyal to an ink product, do not use ink with a different brand every time because there are some ink that does not correspond to the filling.

Sixth, if it fails to print, turn the printer off and unplug the cord, let stand for a moment. Then Plug in and turn on the printer to print again.

Finally, use the diagnostic tools to figure out what exactly the problems found on your printer and then take it to the printer service that you know

Sunday, July 10, 2011

Sit comfortably while working hard

Have you ever felt soreness around the waist and knees when working? if ever, maybe the problem was triggered by an incorrect sitting position. In fact, on the one hand, posture strongly influenced from the habit of positioning the body, such as standing, sleeping, or sitting.
Have you then estimate how much time is spent in a day in the seat when the task? Well when typing on a computer, design drawings, and read the report, often times you do not realize the time has gone so long. Things like this, plural done in everyday life.

Well, if the seating position is wrong is taken for granted, did not rule out the quality of your health will gradually decrease, primarily related to the function of bones and joints. Even so the performance was not optimal.

Therefore, try to follow some of these lightning. Undoubtedly, it can help you to find to find comfort while sitting for hours even once.

Sit upright with your back straight and shoulders back.

To make sure your spine, you can raise your body and make the arch back as far as possible in a few seconds. Only later, relax position to approximately 10 degrees.

If you have not been strong for a normal seat like that, start by wearing a back support such as pillows or bolsters to support your spine.

Do not also ignore the position of the feet and knees. Symmetric bend your knees to one another with a higher position of the hip. Then you should put both feet in a position parallel to the floor.

If you want to take the items behind or beside you, do not twist your back, but rotate around the body to reach it.

Every now and then make the body in a state of relaxation. Do not forget the eyes off the computer monitor in front of you. Do about three to five minutes, every half hour.

Do not forget to multiply the drink, although the work while still sitting in the room without realizing your body is dehydrated.

Saturday, July 9, 2011

Between Subsidized apartment or house in the outskirts

A city with a title as the government center and business center, the city is promising a lot of things. What you want are all in cities that can be said to never sleep (24 Hours always live). Not surprisingly, many large cities like it much visited by others in hopes to earn a fortune with her fate hanging in the city.

Unfortunately, land prices in large cities are less friendly to middle-class workers whose earnings are relatively common. As a place to live, of course eventually many prefer to live in the suburbs of big cities. The reason is of course due to land on the outskirts of large cities is more affordable and less stifling in their daily needs.

Housing in the suburbs has become an idol for most employees who work in big cities. Clean air, land large enough at affordable prices, various facilities and developers, plus access and means of transportation to major cities is more complete with the bus, train. It does attract many people to live there, especially for those already working and want to avoid the hustle and bustle of the city atmosphere.

However, it does not mean it is impossible to have a place in large cities with sufficient funds. A versatile as possible, especially with the presence of subsidized apartment from the local city government. Call it the Jakarta example, the city government has made a subsidized apartment.

Although the land is limited, at least you no longer need to think about the page because the apartment is also offered subsidized sports facilities and playgrounds. It is located too close to public transportation such as the Trans Jakarta busway, making it easier for you to reach the destination or the workplace in a matter of minutes. Even so close it could allow you to lunch or just to visit children at home, so the quality and intensity on a relationship with the child still nurtured well.

The house in the suburbs or subsidized apartments have the same positive things. You only need to adjust to the need for a place to live.

Thursday, June 23, 2011

Countries dream for Students: Canada (Part One)

Neighboring countries, the United States has also become one of the goals and students to study. About 50 universities and more than 150 colleges are generally owned by the government to offer science and technology. Several types of existing higher education;

University. Held a variety of fields of study and grant degrees ranging from bachelor's (undergraduate), master (graduate), up to doctoral (postgraduate), as well as certificates and professional degrees.

Community College / Technical College. An institution which organizes the professional education program, practically oriented and very interested in the world of work. Education takes a long time for 1-3 years.

University College. It is a blend of university and college. University College held a lecture with small classes and have a good support student services.

Career College. Is a private college, usually short-term education programs in preparation for employment. Practical career education in college, students can take a culinary specialties such as art, hospitality management, and computers.

Expenditure per year (in Canadian dollars):
School Fee/ University fee ranges from 8000-25000.
accommodation, meals range from 9000-15000.
insurance ranges from 800-1000.
Allowance ranges from 3000-5000.
The book ranges from 600-1000.

Friday, June 10, 2011

The Office Cubicle an efficiency room desaign

work has become part of your routine. To support the performance of work, of course, it needed an office-appropriate advice. Not only the printer engine, scanner, fax, and telephone, but comfortable office interiors are also a valuable asset. 

Unfortunately, not all offices have a roomy workspace. Consequently, with limited space and number of employees who are many, the architect must be very clever to design a room that is effective, but still able to provide comfort. 

Finally, the current solution is to use a cubicle workspace. Derived from the Latin, meaning cubiculum bedroom, cubicle office has now become a plural section encountered. 

The terms and application of this cubicle was originally introduced by John Shiflett in 1965. Designers from Colorado, the United States is making a prototype to his office Herman Miller Inc., a manufacturer of office furniture. 

Prototype made by John was originally composed of modular units with an open concept that is simple, a new concept in that era. Cubicle usually is the work area for one person complete with table and chairs plus septum 1.5-1.8 meters tall. 

The existence of this cubicle allows the workers still have privacy, also support them to continue to concentrate on work. Initially, the use of cubicle can easily be found in technology companies and insurance information. 

Ironically, it turns behind the existing benefits, cubicle often gets a negative connotation, namely cube farm. As if working space is so limited by barriers and the workers seemed to live only in a box. 

Stated another first today. Now cubicle design view appears more comfortable. Formerly rigid now more flexible to adjust the interior of the office. Many interior designers and architects to plan the concept of office space with a mature and integrated. 

In addition, to support area more comfortable as well as the field is modular in cubicle desainn. With a modern minimalist design allows office furniture including desks can easily be changed at any time.

Friday, June 3, 2011

Implementation of green technology in cellular communications by Telkomsel

Indonesian mobile company, Telkomsel aware that the sustainability of the withdrawal in harmony with nature preservation. children's work through the country, Green Technology innovation can never stop created. Until now, no less than 2200 BTS (base transceiver stations) are based on environmentally friendly scattered in various parts of the territory of Indonesia.

Ministry of Energy and mineral resources has recently mentioned the energy reserves of fossil / fossil fuels was only able to survive for the next 20 years. Wisdom in the use of energy / fossil fuels have been proposed and implemented for the sake of absolute for human survival. Therefore, Telkomsel as one of the largest telecommunication companies in Indonesia have been aware from the beginning to operate in creating technology-based mobile telecommunications technology green (environmentally friendly). In a sense not only build a network infrastructure that uses fossil fuels but rather use alternative energy.

Benefits of solar energy and water to smooth communication

There are several choices of energy sources in the operation of the BTS. First is the use of solar energy resources to ensure availability of power supply to the BTS. The existence of this solar energy from the cost side is relatively so cheap to meet the needs of about 0115 Megawatt electric power. No less than 164 BTS-type solar cell's Telkomsel has spread across the territory of Indonesia.

In addition to utilizing solar energy as an energy source for power supply base stations, Telkomsel considers it necessary to utilize the potential of river water flow in all regions of Indonesia. Through mikrohido technology (utilization of river water flow as a source of electrical energy) to make BTS Telkomsel to build this type of micro hydro Indonesian people for smooth communication. This is supported also by the need for the Indonesian people who live in rural areas.

Solar cell and mikrohido technology has been applied, in addition to existing renewable energy sources by making use of materials Baar hydrogen (or fuel cell technology). The advantage of this energy source, among others, no noise, no moving parts and produces no pollution due to wastes generated are water molecules.

Thursday, June 2, 2011

Television and the Internet increasingly unified

 (image from

Television set is no longer just a tool for viewing only, but also interact with the virtual world. The style is more interesting to watch this will soon affect the way viewers in this country enjoy a glass viewing screen.

Actually not just viewers who benefited, but also new opportunities for the electronics industry that has been impressed saturated. A new way which will certainly impact the future television viewing behavior and encourage the development of content industries of television.

Impressions through television stations are common, direct service from the satellite it is common, existing cable Tv. This year Telkom also provides services through the Internet or Internet protocol TV (IPTV) and TV are connected with the Internet provider (ISP), including mobile operators.

The presence of this new technology will further make TV viewers at home to linger in front of the plane. Boredom with the TV show can be filled with, among others, explore the virtual world, casual access to social networks like facebook or twitter.

Included are also chasing the news on a news site, not just read the running text of a brief saint. However, news website often features news faster than television.

At least, this development will be a moment forget the regulatory uncertainty that are just starting the process of migration to digital broadcasting. While demonstrating how far the world has evolved, even entering the broadcast of three-dimensional (3D) since 2010.

IPTV services by utilizing the Indonesian telecom cable network already carries its fixed telephone service kualidas HTTV (high definition). In fact, the 3D service will also be present through a cable or DSL, as well as digital broadcast satellite or from the course.

This new trend has made the world's electronics companies are competing. Like the LG, the electronics company as well as communication Korean origin are currently preparing for its newest product on TV. Besides the form of smart TV that can access the Internet, also a revolutionary 3D TV. 3D Impressions today it has become a global trend that will certainly affect the market. Although 3D broadcast has not enjoyed by all citizens of the world, at least the viewers can get a file via 3D blue-ray player on the market.

It's one of the new developments though a new generation of 3D TV still require viewers to wear special glasses. The quality is also much better than cheaper, lighter, only about 16 grams, and requires no battery power again or passive.

Sunday, May 29, 2011

Claiming Blog for Pay Per Post

Today, I have to finished my assignment to earn money from just like sponsoredreview and blogvertise. I only have to do some copy and paste working to claiming my blog at payperpost. This is the words that I have Copy and Paste at my Blog`s pages:

This chopped board joins with the poke under the concluded fountain.

Now that you've added your blog, we need to make sure that you own this blog.

Create a new post on your blog. Copy and paste the randomly generated sentence shown above exactly as it is given anywhere in your new post. Publish the new post so that it is viewable at your blog's URL.

Once this sentence is on your blog, come back to your PPP account and press the claim blog button. You can remove the post after you have successfully claimed the blog.

The relationship between Islamic philosophy with the science of kalam

As known to use a big mind in the discussion of religious matters in Islam are not only found in the field of Islamic philosophy, but also in the field of science kalam, tasawwuf, fiqh usul, and science. For that reason, in this case we will discuss the relationship between philosophy with science kalam.
Kalam in Arabic can be defined with words and sayings. In linguistic science, kalam is composed of words in a sentence that has meaning. While the science of religion, which is meant by kalam is the word of god. Then these words indicate a science of its own, called the science of kalam. Among the reasons advanced, is as follows: 

The most important issue is the talk of the early centuries hijrah is the word of God or word of the Koran as one of His nature, whether Kadim, not created, or the hadith (for new), was created? (Please be distinguished tradition says the opposite of Kadim, the Hadith: sayings, words, determination and character of Prophet Muhammad SAW) 

Foundations of the arguments of kalam is reason (ratio). The theology or mutakallimin define the subject matter with reasonable arguments put forward in advance, after completion of their new back on the argument naqal (Qur'an and Hadith). 

Way of proving the religious beliefs of science like logic and philosophy.
Thus, the science of kalam is one of Islamic science that arise from the discussion of the Islamic ummah in formulating the creed of Islam by using the arguments of reason and philosophy. This can be seen in many science books Kalam (science of monotheism) is always first put forward reasonable arguments (logic), then followed with the argument naqal (Qur'an and Hadith). 

Upon premises that, among the writers of Islam, like Ibn Khaldun in his Prolegomena, Al-Iji in Al-Mawaqif, Mushtafa Abdul Raziq in his book Al-philosophy Prolegomena chronicle al-islamiyyah and Renan in his book, Ibn Rushd wa al-kalam Rusydiyah incorporate science into the scope of Islamic philosophy. This is because they see that between these two Islamic disciplines have a very close relationship and the issues discussed between them already mixed so it is difficult to distinguish. 

Kalam Science as well as Islamic philosophy, influenced by Greek philosophy. However, the main source of their advantage is the religious texts. It can be seen especially in alliran Mu `tazillah and Al-Ash` ariyah. However, in reality the science of Kalam was born from the problem of Islam itself, while the solution is only affected from philosophy.
It is clear that the distinction between Islamic philosophy and science of kalam is located on the method and its object. In detail can be presented as follows: 

Science is essentially religious kalam different methods and objects of Islamic philosophy. Philosophy of intellectual method, then the religious texts serve as evidence to justify the reason. Meanwhile, the science of kalam is a method of argumentation, then used as a tool to justify the philosophy of religious texts. The object of philosophy is God, nature, and humans, while the science of kalam is the object of God and its properties and the relationship of God with nature and human life on earth in accordance with the Shari'a of Allah revealed to His servant in the holy books. Philosophy ford field without thinking associated with the existing opinions. While the science of Kalam take propositions contained in the creed of religious texts that no possible doubt as the existence of God, then look for arguments.
Philosophy is a foreign term (Greek), who entered the world of Islam (Arabic language). So, the philosophy of Islam is a product from outside Islam, while science is the science of Islamic kalam itself was born from discussions about the Qur'an, whether the hadith, for new, or Kadim? 

Beginnings of Islamic philosophy born in the late second century hijra early third century, there were already well-known philosophers as philosophers, such as Al-Kindi as the Arab philosophers. Similarly, in the science of kalam the characters are still called mutakallimin and not called philosophers. In addition, there has been sharp disagreement between the philosophers and the theologians like the case between the theologian Al-Ghazali Al-Ash `ari and Ibn Rushd.

DMCA Protection