There are various ways to care for your motorcycle, such as by using some product maintenance or bring it to the garage for inspection periodically. However, these activities would likely require an additional fee. When you treat your motorcycle it is also like treat and growing your body, you are required to also do a preventive for your motorcycle. One way to raise awareness of road conditions. Your behaviour when passing the street can affect the performance of the motorcycle. Therefore, please observe the following.
Bend. In the face of the bend when the high-speed motorcycles, traction or traction tires are required precisely because of drastically reduced tire work harder to gain traction. Things you should do is put the brakes as hard as possible without tires locked. Then, lower gear before starting motorcycle deflected so that the maximum traction tires.
Sleep police. There is a need to be aware when passing police sleep because it will affect the braking and traction on a motorcycle frame. You should reduce speed and pass bump in the upright position. Do the brakes as hard as possible without locking the tires to near objects. Once the speed is reduced, the brake is released immediately and let the bike through it so that the brakes did not receive any load.
Stagnant water. Reduce speed when passing motorbike puddle because it will reduce traction (traction) tires. If still possible, you should avoid standing water for fear of inundation depth can be dangerous. Be careful driving in wet conditions, especially in keeping a distance with other vehicles to avoid pileup. Do not forget to use a low speed when turning.
Slippery roads. In general, oil spill or make its way into slippery mud. This is very dangerous because it can eliminate the traction tires so the vehicle difficult to control, even, not infrequently make motorcycle slipped. You should still pass, but with the upright position with a low speed.
No comments:
Post a Comment