Scooter stalled. One of the most frequent problems experienced by scooter is a dirty carburetor or nozzle is choked. This resulted in the rate of scooter was halting. If you experience problems scooter like this, clean the fuel tank of dirt and rust and check the fuel line from the fuel crust. After that, clean the carburetor using compressed air and check back nozzle holes not to get dirt left behind. Check also if the nozzle orifice size is just right, do not get too big or too small. When greatness, scooters would wasteful of fuel and spark often dies. Hole size based on the size of the factory defaults.
Scooter difficult ignited. Scooters are one of the hard switched ignition dampaka incorrect. This usually happens because an ill-fitting suit or platinum because one ignition devices such as spark plugs, platinum, or spool ignition unsuitable or die. To find the location of the problem, check the spark plug tip color. When are black, spark plugs will not spark a fire. If this happens, reset the nozzle size pilot jet and main jet. When the color of red brick end of the spark plug, check the other ignition parts.
Problems can also stems from platinum setting. Setting the correct platinum rift is the distance between the connector and the connector plusnya minus approximately 0.5 millimeters. Also check whether the ignition spool still worth taking. Spool faulty ignition coil usually characterized by blisters spool, spool reels are sagging, or broken spool.
Rocking scooter. In this condition, which is usually problematic component is the rubber vibration dampers or machine. If the scooter run into this problem, check the condition of tires and wheels eligibility. Bald tires should be replaced. Conditions wheels must also be stable, do not let anyone shake. Check also shockbreaker. Shockbreaker already weak to be replaced so that you can still drive comfortably and safely.Knowledge about these machines you should know when you want to drive a scooter.
No comments:
Post a Comment