Motorbikes today not only as a tool around the complex, reaching the market, mini, or some other places around the house. Now, more motorcycles are used as long-distance transportation to reach the workplace. Could be, because the motor is considered as one of the transport capital that can save time and fuel. Moreover, traffic congestion is an increasingly frenzied.
Given the far distance, there are some things to do before driving. It is important to avoid the possibility of strikes on the road or fatal accidents due to trivial things, such as fuel runs out or a flat tire. Before sitting on the seat of the motor, it's good if you make some important steps. First, turn on the machine. Before the key rotated to a position on, you should do first kick starter 3 times. This will help the lubrication system on the engine components because during the process of settling time, the oil will tend to settle in the crankcase. Only then did the usual-starter, either using a crank or by pressing the electric button.
While warming up, check the state of petrol in the tank through the indicators contained in the motor compartment. Check also the other components. Make sure the gas does not stuck grip while playing. Likewise, the lever and clutch cable.
Next, check the front and rear brake job which is very useful for safety. Do not forget to check tire pressure. Generally for daily use, the pressure on the front tire was made 19-20 psi and 22 psi for the rear tires. After that, also check the chain tension. Adjust the chain tension by using bolts regulator. Check also the horn and lights function, especially the brake lights so as not diseruduk by another vehicle while on the road. Lastly, make sure the Certificate of Number of vehicles and driver's license, motorcycle type stored in a wallet that you carry. By checking the completeness of this kind, driving would be much more comfortable.
No comments:
Post a Comment